Symetrix X Control

Description: External Control Expander Symetrix XCONTROL External Control Plus. Designed for use with Radius, Prism, Edge, and Solus NX DSPs. Especially useful in conferencing and paging applications. Each of the 8 flexible analog control inputs may be configured for 1 potentiometer or 2 switches. The 16 logic outputs may be used to drive LEDs, trigger external relays, or control contact closure ports. Either of the 2 RS-232 ports may be configured to issue or receive commands to or from third-party control systems. Utilizing PoE, xControl may be mounted where convenient and connected to a control network using a single cable. The half-rack form factor conserves rack space, or if preferred, the xControl may be surface mounted at point-of-use. Features: Analog / Logic Control Inputs / Logic Outputs / RS-232. Flexible 1/2 Rack Form Factor. Powered Via PoE (Switch or Injector). Each of the 8 flexible analog control inputs may be configured for 1 potentiometer or 2 switches. The 16 logic outputs may be used to drive LEDs, external relays, or control contact closure ports. Either of the 2 RS-232 ports may be configured to receive commands from, or issue commands to, third-party control systems. Applications include adding push-to-talk capability and LED activity indication in conferencing and paging applications and. RS-232 projector, camera, and lighting control. Multiple xControls may be combined. Straight forward set-up and management using Composer open-architecture software. Versatile half-rack design for mounting in optional 1U rack tray or surface mount with optional bracket. Specifications: External Control Inputs Number of External Control Inputs: 8 to 16 total; each configurable to accommodate 1 potentiometer or 2 closures for a maximum of 8 potentiometers or 16 closures Connectors: 3.81 mm terminal blocks Reference Voltage: 3.3 VDC Recommended Potentiometer: 10k Ohms linear taper Logic Outputs Number of Logic Outputs: 16; each capable of driving an LED directly, triggering an external relay or sinking external voltage/current. Low (0 VDC) when active, pulled high (5 VDC) when inactive Connectors: 3.81 mm terminal blocks Maximum Output Voltage: 5 VDC Maximum Output Current: 10 mA Maximum External Power Supply Voltage: 24 VDC Maximum External Power Supply Current Sinking: 50 mA RS-232 Ports Number of RS-232 Ports: 2 Connectors: 3.81 mm terminal blocks RS-232 Port Parameter: 57.6 kbaud (default), 8 data bits, 1 stop bit, no parity, no flow control wired straight-through, only pins 2, 3, and 5 required System Ethernet Cable: Standard CAT5/6, maximum device-to-device length = 100 meters Item Includes: 1x xControl hardware device. 1x North American (NEMA) and Euro IEC power cable. You may need to substitute a cable appropriate for your locale. 1x 15 Watt, 100-250 VAC input, 48 VDC output, PoE injector. 18x detachable 3.81 mm terminal block connectors. 1x 3' shielded CAT5e RJ45 cable. 1x Quick Start Guide

Price: 400 USD

Location: Watertown, New York

End Time: 2024-11-27T02:59:54.000Z

Shipping Cost: N/A USD