RC Airplane Aircraft Warbird Fighter Nexa F6F Hellcat 1535mm 60.4" Wingspan ARF

Description: RC Airplane Aircraft Warbird Fighter Nexa F6F Hellcat 1535mm 60.4" Wingspan ARF Version - US STOCK The F6F made its combat debut in September 1943, and was best known for its role as a rugged, well-designed carrier fighter, which was able to outperform the A6M Zero and help secure air superiority over the Pacific theater. A total of 12,275 were built in just over two years. Hellcats were credited with destroying a total of 5,223 enemy aircraft while in service with the U.S. Navy, U.S. Marine Corps, and Royal Navy Fleet Air Arm. This was more than any other Allied naval aircraft. Postwar, the Hellcat was phased out of front-line service, but remained in service as late as 1954 as a night fighter. The Nexa F6F Hellcat is a .50 size electric or gas option scale series warbird with a 1570mm wingspan, constructed primarily from balsa wood and covered with a fuel-resistant covering. This ARF requires assembly and installation of your choice of servos and power system, and includes flaps, painted pilot, machine gun, antenna and other scale details. The large battery hatch affords ample room for either electric or gas setups. Impress at your flying field with this iconic stunner! Fully Covered and DetailedThe Nexa F6F Hellcat comes fully covered including simulated panel lines, rivets, nomenclature and weathering detail. Scale Details ThroughoutThere is no shortage of scale details with this F6F including functional flaps, antenna, machine guns, and painted pilot. Prehinged and Installed Control SurfacesAll control surfaces come out of the box fully prehinged and installed for your convenience. Center-Mounted Bomb and Wing Pylons Large Battery HatchThe F6F has a large battery hatch area to fit an array of LiPo battery sizes. Features:Complete Balsa and lite-ply construction for rigidity and durabilityCovered from tip to tail in scale details including weathering, functional split flaps, printed simulated panel lines and rivetsFiberglass cowling for strength and durabilityThe hand-painted pilot is ready for your added cockpit detailsAll control surfaces come out of the box pre-hinged and installed for convenienceLarge battery hatch allows for your chosen electric or gas setup Product Specifications:AGE LEVEL: 14 and upSKILL LEVEL: IntermediateBUILD TIME: 6+ hours Model Scale: 1/9 Wingspan: 1535mm / 60.4in Length: 1130mm / 44.4in Weight: 3500g / 123.4oz CG (Center of Gravity): 92-96mm from the leading edge of the wing's root Power System: 400Kv Brushless outrunner motor for electric or 2-stroke for gas (required) Electronic Speed Control: 65A (required) Propeller / EDF: 15x8 2-blade for electric or 15x8 gas 2-blade for gas (required) Servos: 4x standard servos for ailerons, elevator, and rudder; 4x standard servos for flaps Landing Gear: Electric retractable (required) Required Battery: 6 Cell 22.2V 4000 mAh LiPo Battery (required) Required Radio: 7+ Channel (required) Ailerons: Yes Elevator: Yes Rudder: Yes Flaps: Yes Lights: No Hinge Type: Nylon Material: Balsa and light plywood Skill Level: Intermediate Build Time: 6+ Hours Recommended Environment: Outdoors Includes:Nexa F6F Hellcat 1535mm (60.4") Wingspan - ARFWheelsFuel tank, hardware and servo traysCustomer NoteNexa ARF models are constructed out of balsa wood and plywood. These are not foam models. The assembly of balsa wood ARF aircraft requires basic model building skills including the installation of servos, ESC, and motor (or gas engine).

Price: 378.43 USD

Location: Gurnee, Illinois

End Time: 2024-12-03T02:32:44.000Z

Shipping Cost: 0 USD