Iver Johnson Arms

Dayton Audio EX32EP2-4 Thruster 32mm Interchangeable Hardware Mount Exciter 40W

Description: Dayton Audio EX32EP2-4 IMS™ Thruster 32mm Interchangeable Hardware Mount Exciter 40W 4 OhmTest the limits of your imagination and turn any surface into a great sounding speaker system Surface exciter technology provides a universal, cost-effective alternative to loudspeakers, allowing for sound reproduction virtually anywhere it is desired. Issues such as weather, space constraints, vandalism or visibility can be avoided or minimized with the use of a sound exciter. Dayton Audio IMS™ Interchangeable Mount exciters may be used in a host of DIY executions to easily add sound to an existing non-audio specific project or create a portable speaker system, the unique mounting system allows you to try out the assortment of exciters offered by Dayton Audio! Want to learn more about exciters? See our Exciters & Tactile Transducers Introduction Paper!Read MoreKey Specs:  Power Handling (RMS): 40 Watts Power Handling (MAX): 80 Watts Impedance: 4 Ω Neodymium Motor 1/3rd octave smoothing - measurement taken with transducer adhered off-center on a 12" x 12" x ½" foam core board in an infinite baffle setup.  Note: This information is for comparison purposes only, the actual frequency response will depend on many factors of which the diaphragm being the greatest contributor. Aural Excitement Dayton Audio's EX32EP2-4 IMS™ Thruster exciter is built to turn large, thick, rigid surfaces into speakers. The 32 mm voice coil is attached to a steel spider for maximum restoring force when large amounts of power are applied, making it perfect for large glass panes, furniture, and surfaces that would normally resist the effects of an exciter! A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar-sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. IMS™ Exclusive Interchangeable Mounting System With Dayton Audio's IMS™ exclusive interchangeable mounting system, you can try out many different configurations, placements, and exciters to find the best combination for your project. Each exciter comes with a threaded mounting pad that can be permanently installed anywhere. Installation is easy, simply remove the pad from the exciter assembly, mount the pad to your project with 2 screws or with the 3M VHB™ adhesive, and screw the exciter assembly back onto the pad! The non-destructive nature of the interchangeable mount allows you to A/B different exciters or swap non-functional units out in the field without risking damage to your project or exciters.  We've Got Your Back We stand behind our products and our warranty is a demonstration of our commitment to quality and reliability.Learn MoreSee All Of Our Interchangeable Mount Exciters All of Dayton Audio's IMS™ interchangeable mount exciters take advantage of the same mount to provide an easily swappable configuration, pick up yours today from Dayton Audio! EX25CT2-4Nominal Diameter: 25mm Impedance: 4 Ohms Shop NowEX25VT2-4Nominal Diameter: 25mm Impedance: 4 Ohms Shop NowEX25FHE2-4Nominal Diameter: 25mm Impedance: 4 Ohms Shop NowEX32EP2-4Nominal Diameter: 32mm Impedance: 4 Ohms Shop Now EX32U2-4Nominal Diameter: 32mm Impedance: 4 Ohm Shop NowEX30HESF2-4Nominal Diameter: 30mm Impedance: 4 Ohms Shop NowEX32Q2-4Nominal Diameter: 32mm Impedance: 4 Ohms Shop NowEX32Q2-8Nominal Diameter: 32mm Impedance: 4 Ohms Shop Now Shop All Exciters   Learn MoreRequest Quote Show Off Your Builds We would love to see what you can build. Show off your creativity and skills by uploading to our project gallery. For inspiration, see what others have built below: Submit your projects to receive a 6-month digital subscription to audioXpress magazine Shimmer Tree by Dan FoxShimmer Tree is an impressive six metre high tree-like sound and light sculpture controlled by the wind. As the listener wanders underneath, the directional sound and changing resonances envelope the listener in an evolving and meditative sound bath that responds to the environment. It has 12 branches and 12 large cymbals suspended above head height. Each cymbal is fitted with a tactile transducer, transforming it into a metallic resonator speaker.SoundPhoto by David F GirouxI started with a vibrant 12×24″ metal print of fireworks over the Madison, Wis. city skyline — the “Shake the Lake” show over Lake Monona. This is my own photo, in a high-resolution professional print directly on a sheet of polished aluminum with1.5″ inset metal frame on the back. I installed a Dayton audio 15w/ch amp and 2 Dayton exciters behind the panel. Power switch, volume control, and aux audio input mounted discreetly on the side.Bertha by Matty HughesMy new 192 Watt DIY DML panel build (Bertha)! At 20in x 22in each 1/4″ thick plexiglass panel is running at 4 ohm’s @ 96 Watts, exciters wired in a series-parallel configuration for each panel and powered by a HiFi 100W x 2 (200W) Bluetooth 5 amp with a 24V 10a power supply. A total of 8 Dayton Audio DAEX25FHE-4 Framed High Efficiency 25mm Exciters each 24W 4 Ohm were used for this DML build.Â

Price: 25.98 USD

Location: Springboro, Ohio

End Time: 2024-02-27T19:56:46.000Z

Shipping Cost: 0 USD

Product Images

Dayton Audio EX32EP2-4 Thruster 32mm Interchangeable Hardware Mount Exciter 40WDayton Audio EX32EP2-4 Thruster 32mm Interchangeable Hardware Mount Exciter 40WDayton Audio EX32EP2-4 Thruster 32mm Interchangeable Hardware Mount Exciter 40WDayton Audio EX32EP2-4 Thruster 32mm Interchangeable Hardware Mount Exciter 40WDayton Audio EX32EP2-4 Thruster 32mm Interchangeable Hardware Mount Exciter 40W

Item Specifics

Return shipping will be paid by: Seller

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money Back

Return policy details:

UPC: 848791008566

MPN: EX32EP2-4

Brand: Dayton Audio

Manufacturer: Dayton Audio

Type: Exciter

Connectivity: Wired

Model: EX32EP2-4

Recommended

Dayton Audio DMA45-8 1-1/2" Dual Magnet Aluminum Cone Full-Range Driver 8 Ohm
Dayton Audio DMA45-8 1-1/2" Dual Magnet Aluminum Cone Full-Range Driver 8 Ohm

$8.48

View Details
Dayton Audio SUB-800 8" 80 Watt Powered Subwoofer
Dayton Audio SUB-800 8" 80 Watt Powered Subwoofer

$134.98

View Details
Dayton Audio (RS 180-8) Reference Series 7” Woofer
Dayton Audio (RS 180-8) Reference Series 7” Woofer

$48.00

View Details
Dayton Audio DSP-408 4x8 DSP Digital Signal Processor for Home and Car Audio
Dayton Audio DSP-408 4x8 DSP Digital Signal Processor for Home and Car Audio

$164.98

View Details
Dayton Audio  Aurum cantus mid-woofer speaker. Midwoofers (Pair)
Dayton Audio Aurum cantus mid-woofer speaker. Midwoofers (Pair)

$165.00

View Details
Dayton Audio RS52AN-8 2" Dome Midrange
Dayton Audio RS52AN-8 2" Dome Midrange

$33.00

View Details
Dayton Audio DA115-8 4" Aluminum Cone Woofer
Dayton Audio DA115-8 4" Aluminum Cone Woofer

$29.93

View Details
Dayton Audio B652-AIR BOOKSELF SPEAKERS Set Of (2) - Untested
Dayton Audio B652-AIR BOOKSELF SPEAKERS Set Of (2) - Untested

$49.97

View Details
Dayton Audio ND105-PR 4" Aluminum Cone Passive Radiator
Dayton Audio ND105-PR 4" Aluminum Cone Passive Radiator

$17.93

View Details
Dayton Audio PA255-8 10" Classic Subwoofer 8 Ohm
Dayton Audio PA255-8 10" Classic Subwoofer 8 Ohm

$60.00

View Details